How To Fix Bricked Samsung Galaxy E7/Unroot/Flash Stock ROM [Download]

Want create site? Find Free WordPress Themes and plugins.

Learn How to Flash Stock ROM in Samsung Galaxy E7 or How to fix bricked Samsung Galaxy E7: If You have a Samsung Galaxy E7 and if you are facing any problem like your galaxy E7 is Bricked, stuck at the Samsung Logo, Galaxy E7 gets blank out screen, E7 is not starting or Bootloop problem, also if your E7 is rooted and you want to Unroot your Galaxy E7 or any of problem is happening with your Samsung Galaxy E7 then don’t worry about your Bricked Galaxy E7, here you will get all in one complete solution for your Samsung Galaxy E7, you can easily fix your E7 by simply Flashing Stock ROM in Samsung Galaxy E7.

 

SamsunggalaxyE7-Fix-Unroot-FlashStockROM
Samsung Galaxy E7

    Samsung Galaxy E7

Samsung Galaxy E7 is entire range smartphone, it comes with very good and attractive features like 5.5 inches screen, 720 × 1280 resolutions, works on android version 4.4.4 KitKat, upgradable to 5.1.1 Lollipop, CPU- Quad Core 1.2 GHz Cortex-A53, Internal Memory-16GB, 2 GB RAM, primary camera- 13 MP and Secondary camera- 5 MP, 2950 mah battery. and it comes with Dual Sim 3G, 4G, Wi-Fi also.



One Solution To Fix Every Single Problem In Bricked Samsung Galaxy E7

You can solve the any of  Problems about your Galaxy E7, By simply Flashing Stock ROM in Samsung Galaxy E7, some of problems I’ve listed below, which you can solve easily by just flashing ROM:

 

  • If your Samsung Galaxy E7 is not starting
  • If your Samsung Galaxy E7 stuck at blank out screen only
  • If your Samsung Galaxy E7 stuck at Samsung Logo
  • You can Unroot your Samsung Galaxy E7, and again get its warranty officially.
  • If your Samsung Galaxy E7 Stuck at Boot-loop.
  • If you don’t have a backup of your Stock ROM and you’ve already installed a custom ROM in your Samsung Galaxy E7, and want to revert it back into your original condition, just Flash Stock ROM.
  • According to me flashing ROM in any device is a best trick to comeback android again in its original condition, which make feels you like you’ve purchase your phone after flashing stock ROM. and the best advantage is that if you’ve rooted your phone, then its common you had lost your warranty, and after flashing Stock ROM you can get your phone’s warranty back officially.

 

 

Warning: This tutorial is only for Samsung Galaxy E7, don’t try this tutorial for flashing ROM in other android phones.


 

    Requirements To Fix And Flash Stock ROM In Samsung Galaxy E7

Before going for flashing Stock ROM in Samsung Galaxy E7, you’ve need some requirements, that I’ve Listed below:

 

  • A PC or Laptop
  • Make sure your phone’s battery is charged at least 50%
  • Enable USB Debugging- Go to your settings> about phone> find Build number and tap it 4-7 times until its show you a message “Now You’ve a Developer Option”. Now go to your settings> developer options> Tick on USB Debugging. (If your phone is not bricked, otherwise leave this option)
  • Make a full Backup of all your apps and important data, because flashing ROM can erase everything from your Phone’s memory. (If your phone is not bricked, otherwise leave this option)
  • Download Odin Flashing Tool From HereOdin 3.09 (this is a zip file, first extract it to use)
  • Download USB Driver for Samsung Galaxy E7 USB driver  (this is a zip file, first extract it to use)
  • Download Stock ROM for your Samsung Galaxy E7, check your model and download Stock ROM from here I’ve listed below:

Samsung Galaxy E7 Stock ROM/Firmware For SM-E700H – Download (5.1.1 Lollipop)

Samsung Galaxy E7 Stock ROM/Firmware For SM-E700F – Download (5.1.1 Lollipop)

Samsung Galaxy E7 Stock ROM/Firmware For SM-E700M – Download (5.1.1 Lollipop)
 By flashing this stock ROM you can directly upgrade your Samsung Galaxy E7 from KitKat to Lollipop

Make sure you’ve check all the above requirements that I’ve listed, all the downloads- Odin, USB Drivers and Firmware(Stock ROM) comes with in a zip format you have to extract all the files before using.
you can extract these files with 7Zip, if you don’t have 7Zip then download it from here.

How To Flash Stock ROM (Firmware) In Samsung Galaxy E7

For flashing firmware in Samsung Galaxy E7, check once again the requirements, if you’ve done then go further and follow carefully the given steps:

Step1.

After installing USB Drivers in your PC or Laptop, Reboot your Samsung Galaxy E7 into Download mode by pressing Home button + Power Button + Volume Down key at a same time for 3-4 seconds until its goes to Download mode, and select continue for flashing process:

 

Downloadmode-GalaxyE7
Download mode- Galaxy E7

 

Step2.

Now Open Odin.****.exe and after reboot your device in download mode connect it with your PC with help of a data cable, after connecting Odin will indicate you a message “Added” and ID: COM port on Odin will turn Blue or Yellow depending on Odin’s version, that also means Odin tool is ready for flashing firmware.

 

FlashStockROMInSamsungGalaxyE7.

Step3.

Now Click on AP or PDA for selecting your firmware that is in .tar or .tar.md5 extension, simply select it and now click on start option on Odin, and leave all settings remain, you have to check only “Auto Reboot” and “F. Reset Time” and leave all settings unchecked, after clicking on start button your flashing process will be start and it takes 5-7 minutes, and when its completed, it will indicate a message PASS on Odin, your device will be automatically Reboot and restart in few minutes, keep patience and do not unplug before its complete, check in below image:

 

FlashStockROMInSamsungGalaxyE7



Step4.

In case, If you got a multi firmware like AP, BL, CP, CSC and .PIT files, then while flashing select all your components one by one and also .PIT file if you have to flash a multi firmware , Check only Re- Partition and F. Reset Time and leave all settings unchecked, now click on start and until your flashing completed. see image in below:

 

FlashStockROM-SamsungGalaxyE7

 

    Fixing Boot loop Problem In Samsung galaxy E7, After Flashing Firmware

In some cases, your device might stuck in Boot loop problem, to solve this simply reboot your device into recovery mode by pressing Power Button + Home + Volume UP and do a wipe data/factory reset, and reboot your device, it will start properly and all problems are now solved! congratulations! you’ve successfully installed Stock ROM in your Samsung Galaxy E7.

 

recovery-mode-SamsungGalaxyE7
recovery-mode-Samsung Galaxy E7

 



    Problems While Flashing Stock ROM Via Odin

I’ve listed some common problems while flashing Stock ROM in Samsung Galaxy E7, so if you are facing any problem, check it double, and try again:

 

  • If you don’t install Samsung USB Driver properly
  • lose or Duplicate Data Cable
  • Wrong firmware, which means you are not using compatible firmware for your device
  • Check only Auto Reboot and F. Reset Time and leave all boxes unchecked for single firmware, and for multi firmware- check Re- Partition and F. Reset Time and leave all boxes unchecked.



[[Note= Sometimes Flashing Stock ROM Might Soft-Brick Your Device, Do At Your Own Risk! I’ll Be Not Responsible For Your Soft-Bricked Android]] 

 

    Conclusion


The post was about How to flash stock ROM in Samsung galaxy E7 to fix any of problem like Bootloop, blank out screen, or if  you want to Unroot your phone and get Warranty officially in your Samsung Galaxy E7. If you are still struggling about your Galaxy E7, then you can ask questions in comment about flashing ROM in Galaxy E7.

 

Did you find apk for android? You can find new Free Android Games and apps.

13 Comments

  1. Anonymous
  2. rose
      • rose

Leave a Reply